COPYRIGHT

All resources offered by this blogsite are shared by the authors themselves. Some of them were rewritten with permission and some were collected throughout the internet and exchanged between peers for personal study. Use of any resources offered for commercial purposes is prohibited. Otherwise you need to responsible for any consequences produced! Any profitable behavior of utilizing the resources downloaded from this site is condemned and disdained sternly.

Some of the resources, and data here were shared by the authors freely and we don't have all the capacity to know, if the components, materials inside the scenes were copyright protected. If you feel some resources have infringed your copyright, please contact us. We will delete them as quickly as possible. We won't bear any legal responsibility for the resources. Thanks.

Custom Search

Custom Search

Welcome to SketchUp, Vray and other Resources

Everyone is capable of learning. Learning is part of life. It is a social process of living and bringing everyone to share their inherited resources and discoveries. All of us can influence the life of others through sharing and caring. It is our belief that everyone should be a lifelong learner.

I am putting very important visualization resources and series: tutorials, tips, tricks, VRAY materials and settings, and mini-the-making (MTM) processes.

Yours,

Nomeradona

Saturday, 6 August 2011

Tutorial: How to simulate lampshade materials in Vray SketchUp

Vray double sided material allows seeing the light on the backside of the objects. Vray artists use this material to simulate thin translucent surfaces like paper, lampshades, curtains, leaves and others. Gerbe Dumahil explained in this nifty tutorial how to simulate lampshade material using double sided material in Vray SketchUp.










Other renders done with the same technique.


Posted by nomeradona at 04:17
Labels: , ,

24 comments:

  1. ed18 August 2011 at 19:32

    Does the two sided material has to be painted on front and back side of the face? Nice tutorial I am having hard time making curtains and lamps. Thanks

    ReplyDelete
  2. MOHD IZUAN HAMSANI25 August 2011 at 22:59

    great tutorial i like your style :)

    ReplyDelete
  3. nomeradona27 August 2011 at 02:05

    thanks man.

    ReplyDelete
  4. nomeradona27 August 2011 at 02:05

    @renderman yes..

    ReplyDelete
  5. Unknown1 September 2011 at 22:33

    no salen las imagenes

    images do not go

    ReplyDelete
  6. nomeradona2 September 2011 at 00:54

    sorry manuel. reuploaded.

    ReplyDelete
  7. Ricardo P7 March 2012 at 10:43

    This comment has been removed by the author.

    ReplyDelete
  8. made!17 March 2012 at 06:35

    That's great! Thanks a lot!

    ReplyDelete
  9. Bobby Satria Pratama Putra, Amd Architecture31 March 2012 at 09:24

    lets learning :)

    ReplyDelete
  10. agl5 April 2012 at 13:50

    Not working for me. the 2 sided material is mixing front/back colors but any light comes through material. vray for sketchup 1.49 / sketchup 8 pro / system win 7 x64

    ReplyDelete
  11. nomeradona8 April 2012 at 05:04

    aql.. well increase your light inside.

    ReplyDelete
    Replies
    1. agl15 January 2013 at 12:53

      Almost a year later... :)
      After increasing light from 22 to 1100 still no effect.
      What fresnel parameters shoud be applied to reflection layer?

      in your 2SIDED8.jpg the LAMP material in sketchup scene is semitransparent. The material I got in sketchup after using the settings from the tutorial is completely opaque.

      When the LIGHT material is rendered, provides high gloss material such as plastic or latex but is completely opaque.

      can you say what version of sketchup / vray do you use?
      can you upload working material (of full scene w. materials) to forum?

      Thanks in advance

      Delete
    2. Unknown8 June 2013 at 23:52

      same problem but finally found the solution.. i'll try to explain here, but sorry for my english.. you just have to make sure there are no beveled surface in the object, beveled means there are 2 planes between the light source and 'camera'.. if you create a box between light source and 'camera' then no effect happen.. if the light source inside the box, then it will happen.. i hope you understand what i meant..
      that works for me..

      Delete
    3. Unknown25 January 2015 at 07:18

      hello, the solution is:
      1- select the faces
      2- go to Vray materials editor and apply 2sided-Material to selection.
      and enjoy.. it works for me.. thnx good Tut

      Delete
  12. purwo20 May 2012 at 05:38

    hello thankyou very much for your tutorial, i just give some suggestion: may be you can move the picture tutorial no.5 change to be no.4 and no.4 change to.5
    becouse if i follow your tutorial ,really i will confiused to find /lamp when I change the 2 side material, becouse we not create material /lamp yet,

    ReplyDelete
  13. Anonymous22 March 2013 at 03:43

    damn.. soo cool! O_o

    ReplyDelete
  14. Emile Theart23 August 2013 at 02:05

    Fantastic tutorial. Really easy to follow and great results.

    ReplyDelete
  15. Unknown18 September 2013 at 02:57

    cool!!!thank you sir for sharing this helpfull tutorial

    ReplyDelete
  16. บ้านเฮาดีไซน์ และการก่อสร้าง30 September 2013 at 05:03

    This comment has been removed by the author.

    ReplyDelete
  17. Unknown26 December 2013 at 22:59

    Excelente tutorial lo segui y me funcino perfecto. Gracias

    ReplyDelete
  18. Unknown2 May 2015 at 14:17

    Hi! I'm unable to find the material editor.. can anyone please locate it for me?

    ReplyDelete
  19. Unknown8 February 2016 at 02:31

    thank you, your tutorials are amazing

    ReplyDelete
  20. Raúl Galindo14 July 2017 at 11:13

    Hi! excellent tutorial! great work! It worked for me, but I lost the parameters of the LAMP material, I was trying to check them but the images are gone! It says something like update your account of photobucket. Cheers!

    ReplyDelete
  21. Anonymous17 April 2022 at 10:16

    Nomeradona Sketchup Vr: Tutorial: How To Simulate Lampshade Materials In Vray Sketchup >>>>> Download Now

    >>>>> Download Full

    Nomeradona Sketchup Vr: Tutorial: How To Simulate Lampshade Materials In Vray Sketchup >>>>> Download LINK

    >>>>> Download Now

    Nomeradona Sketchup Vr: Tutorial: How To Simulate Lampshade Materials In Vray Sketchup >>>>> Download Full

    >>>>> Download LINK lj

    ReplyDelete

Subscribe to: Post Comments (Atom)