COPYRIGHT

All resources offered by this blogsite are shared by the authors themselves. Some of them were rewritten with permission and some were collected throughout the internet and exchanged between peers for personal study. Use of any resources offered for commercial purposes is prohibited. Otherwise you need to responsible for any consequences produced! Any profitable behavior of utilizing the resources downloaded from this site is condemned and disdained sternly.

Some of the resources, and data here were shared by the authors freely and we don't have all the capacity to know, if the components, materials inside the scenes were copyright protected. If you feel some resources have infringed your copyright, please contact us. We will delete them as quickly as possible. We won't bear any legal responsibility for the resources. Thanks.

Custom Search

Custom Search

Welcome to SketchUp, Vray and other Resources

Everyone is capable of learning. Learning is part of life. It is a social process of living and bringing everyone to share their inherited resources and discoveries. All of us can influence the life of others through sharing and caring. It is our belief that everyone should be a lifelong learner.

I am putting very important visualization resources and series: tutorials, tips, tricks, VRAY materials and settings, and mini-the-making (MTM) processes.

Yours,

Nomeradona

Wednesday 12 December 2012

Nomeradona Tips Series #2 IES Light

I want to share some of my two cents when it comes to IES lighting.

1. Unit Matters:

Alot of people asked this. Why I can't make my IES light to appear, then they do all sorts of tweaking. Some they even put multi-miilion intensity values. Unit in VRAY SketchUp matters and VRAY uses with its DOF value in Inches. This is the same with IES lightings. Therefore the first thing that you will do is to put your unit in inches. So go to your model info, before you render, be sure your length unit is in INCHES.



Since inches and centimeters have little variance, you can also put it in Centimeter length unit.

2. IES Generator

You can create your own IES using Karba's IES generator. It's free and you can download HERE.

Below shows a sample IES light I created. 0 parameters signifies the mid of the light effect. the bigger the angle the bigger the distance of the effect from the center. Once satisfied, you can save your IES light to any folder.


Load the IES file under. Notice that I DID NOT even put value with intensity. VRAY will read the value of the file. 


Below is the render using the IES light I created using the IES generator.



3. Physical Camera Settings

Control the exposure using your camera. I have a very simple VRAY Physical camera setting. I normally start with F number 1.0, Shutter speed 200, and ISO 400. This is a personal preference. Normally with all the IES file that I used, this work as always. Then I adjust the F number if its too bright, if its dark, I normally adjust my ISO with hundred increments.. I guess I am use too on this.. You can opt not to follow me on this.


Below is another render using the above Camera settings but using different IES file.


6 comments:

  1. another great tutorial about lighting,thanks for sharing sir nomer.

    ReplyDelete
  2. Hi all,

    I am using Vray 2.00 for SU. The zoom in the physical camera is not working, please advise.

    ReplyDelete
  3. Wow ..
    So Nice .. I'll try for ies light editor ..
    Thanks for the tips ..

    ReplyDelete
  4. It is a useful and charming post.It is extremely helpful for me.

    diesel generator maintenance & new generator sales

    ReplyDelete